Saturday, 17 October 2015

Building Construction and Design

  • Mineral Spirits Use
    Mineral spirits are excellent materials that are widely being used as paint thinners and as a substitute for turpentine. The turpentine chemical formula is not much different from mineral spirits. However, mineral spirits is more popular being both more economical and more effective.
  • Connecting The Dots In Bridge Construction
    The Mackinaw Bridge, the Millau Viaduct, the Beipanjiang River Railroad Bridge. Ever wonder how these bridges were assembled to cover such amazing and difficult spans? While there is no single construction method employed, there are several fundamental techniques typically used.
  • Characteristics of Epoxy Paint and Thinner
    Epoxies are initially in a liquid state that is changed by chemical reaction to a solid state. The basic components in epoxy are hardeners and resins. Due to their excellent properties, epoxy floors, epoxy primer, and epoxy glue are extremely popular
  • Flood Plains, Insurance, and Building Construction
    Construction in areas prone to flooding presents some very different considerations than in other developments. Availability of flood insurance and varied best construction practices are the main challenges in these locations.
  • What is Earthquake Engineering?
    Earthquake construction is an important discipline that contributes to minimizing damage by using pile foundations, base isolation, and other techniques. Evaluation of soil conditions is also important. Learn more here.
Lead Content in Paint
Lead paint without cracks, fragmentation or deterioration is not likely to be considered hazardous for human health. However, if lead paint has been used in the homes then extra care is essential to avoid unnecessary exposure to lead dust. The door frames and stair railings may have lead paint.


  • Building the Best Foundations
    Created as a base to support all kinds of structures, foundations are one of the least glamorous, yet most important components in structural civil engineering and construction.
  • How To Handle Hydroplaning
    Vehicle control during hydroplaning requires special techniques that are different from normal driving on the road. Thebrakes should not be applied when hydroplaning; otherwise the vehicle may be imbalanced. Steering input should be smooth. Otherwise, control can be completely lost.


  • Infrared Paint Strippers
    Paint removal is a technique that requires special skill to prevent damage to the surfaces from where paint is removed. The traditional methods for paint removal require a lot of skill and time. Infrared heat gun may be used for paint removal that is much more fast, reliable, and safe.
  • Down And Dirty With Sand, Rock, And Gravel Quarries
    Construction aggregates have been a source of civil engineering raw material for centuries, as have the rock, sand, and gravel quarries that produce them. As a form of surface mining, quarries supply staggering quantities of materials for everything from hourglasses to skyscrapers.
  • Metal Roofing Materials for Residences
    Metal roofing materials are being used extensively due to their durability, ease of installation, and other favorable characteristics. If the metal roofing materials are correctly selected, installed, and properly maintained, they will have an extended life.
  • Population Dynamics in Planning for Infrastructure Needs
    Planning for the construction of infrastructure systems is heavily dependent on population trends and population dynamics. As world-wide funding for these construction projects reaches into the trillions of dollars, better predictive indicators are needed.
  • Using Glass as a Building Material
    Glass is one of the most desirable building materials in use today. However, wanting to use it is the easy part. Actually installing and incorporating glass into construction projects is a little more complex.
  • Discrete Event Simulation (DES)
    Discrete event simulation permits experimentation in construction by modeling. The results of processes are determined without incurring the actual expenditures on construction. Several discrete event simulation systems have been developed for the construction industry.
  • Why it's Important to Apply Primer Before Painting
    Though the application of primer increases the cost, it is essential because it ensures a proper adhesion of the paint with the surface. There are several types of primers including oil, latex, and shellac. Prior to application of primer, the surfaces should be properly cleaned and dried.
  • Tectonic Plates Shifts
    Active research is being conducted by scientists to obtain details about the movement of tectonic plates. These movements are responsible for geological events including earthquakes, volcanoes, formation of mountains, seafloor spreading, and island arcs. Most action takes place at plate boundaries.


  • Stuck On Construction Adhesives
    What do gecko feet and screws have in common? They both utilize a form of adhesion, one of the first fasteners used in the construction trade. But of course, there's more to the story...
  • Common Roofing Materials used for Construction
    There are several roofing materials, and the roof to be used can be determined after a careful analysis of the roof cost, age of building, and the maintenance expenditures. Metal roof is one of the common used roofing materials with a life extending to over fifty years.
  • Asphalt Drum Mix Plant
    Asphalt is a useful ingredient that is used for road pavements. There are several processes for the production of asphalt and the Asphalt Drum Mix Plant is one of the main processes. The main feature of this plant is the controlled heating and mixing of the constituents.
  • What Are Paints
    Paints are used to ensure protection of the buildings from harmful weather effects, including rain, heat, and winds, and also to improve the surface finish. The useful life of structures is influenced by the application of paints that are available in several varieties of colors and textures.
  • Fire Resistant Building Techniques
    Devastating. The single word that describes the material, financial, and emotional damage caused by fires in structures. We rely on buildings to provide safety and protection, but how can buildings themselves be protected from the ravages of incineration
Expansion Joints
Expansion joints are utilized for various vital architectural structures that particularly have a need of these joints. Buildings particularly high rise are exposed to various factors like weather, velocity, seismic activity, etc.


  • What Are Construction Crushers
    Crushers are being used in the construction industry since the ancient history. Hydraulic crushers have been developed with a greater speed of crushing. Devices have been incorporated that prevent large size materials from entering the crusher.
  • Andrea Palladio - Renaissance Architect
    The term Palladian architecture brings to mind formal buildings and sprawling mansions in the classical style. Palladio started out inspired by the Romans and rather outdid them with the originality of his own vision. His buildings are a must see for everyone interested in architecture.
Utility of Bulldozers
Bulldozers are heavy equipment capable of moving heavy loads, clearing rubble, and are very helpful in civil engineering works. Modern bulldozers are no uglier and too heavy to handle. They are equipped with electronic devices and they look good, too.


Failure of construction is an important subject for an owner or a builder, since it involves human life and money. Structural failure may be prevented by incorporation of a proper design and use of quality materials. Workmanship is also an important factor to ensure a proper structural construction

All efforts are essential to prevent structural failure as it involves dangers to human life and property. There are numerous causes for a structural failure, and there is a requirement for a proper analysis of all the factors beforeconstruction.

Slow Down Rainwater Drainage from Developments to Prevent Flooding
Under SUDS requirements rainwater has to be held on site and discharged into the drainage system at a slow rate in order to prevent flooding downstream. This article explores methods of storing the rainwater within tanks on site, and allowing it to slowly drain away.

  • SUDS for Crud - Help for Dirty Car Parks
    Drainage discharges from any hard surfacing where there are vehicles can be a problem to keep clean. This is done with the use of separators.
  • Small Green Footprints
    There is much talk at the moment about ozone layers and sustainable building practices, but very little help on how to design and build sustainable construction. This is the first in a series of articles to explore the options available and hopefully start some discussion.
  • Tilt Up Concrete Construction
    Tilt up concrete construction process is used for building of schools, office buildings, houses etc, ranging from single storey to multiple story buildings. The wall panels can be planned to droop inwards when damaged, thus minimizing the risk of collapse.
  • Under Cover: Cloaks And Claddings For Buildings
  • While the least important structurally, sometimes the most important step in finishing a building construction project is the outer skin. These coverings, known as cloaks, claddings, and/or facades, can be a welcome sight when selected and applied correctly, or a dangerous eyesore otherwise.
  • Architecture: from Static to Dynamic
    Since the beginning of architecture, values such as balance and strength were the basis for all design, but recently a tendency to the adoption of organic and dynamic forms has emerged with great impact.
  • The Latest Formwork Systems
    The formwork sector is being influenced by the requirements of improved workplace safety and crane-independent systems that are fast and reliable. Working at heights has become less hazardous. Due to these reasons, concrete formwork is becoming popular.
  • Eco-friendly Construction
    Construction techniques used today should focus on protecting the environment and decreasing pollution to slow down the impact of global warming on our environment. Green building techniques are helpful in maintaining a healthier society and surroundings.
  • Construction Waste Recycling
    Recycling is the processing of used materials into new products to avoid waste of valuable materials. The utilization of new raw materials, energy consumption, air pollution by incinerators, and water pollution by landfills is reduced. Recycling is a crucial constituent of current waste management.
  • Careers in Civil Engineering: Builder and Contractor
    If you have good civil engineering skills and entrepreneurial or business inclination, becoming an independent builder or contractor can be highly exciting and fruitful option for you. It requires lots of passion, motivation, determination and zeal to become a successful builder and contractor.
  • EU Emissions Trading Scheme: Effects on the Cement Industry
    The Emission Trading Scheme (ETS) in effect in the EU is the largest multi-national emissions trading scheme worldwide. Under its jurisdiction are over 10,000 plants that account for almost 50% of the CO2 emissions in the EU and three members of the European Economic Area.
  • Household Seismic Safety
    Earthquakes can cause serious damage, for which it is essential that all necessary measures, including household seismic safety, should be ensured by a thorough planning, rehearsals, and remaining peaceful during an earthquake. Actions during, and after an earthquake, should be known to residents.
  • Fundamentals Of Finite Element Analysis
    Finite element analysis uses a system of points that makes a mesh, programmed to include the material and the structural properties which identify the structural behavior under precise loading conditions. The conditions at different points are analyzed to determine the structural behavior.
  • How to Measure a Tall Building or Skyscaper - 5 More Techniques
    Can you believe that you can measure the height of a tall tower or a building with the help of a friend and his/her height? Read this to learn how to measure the height of a tall tower using a clinometer, a friend, and simple physics formulas.
  • How to Measure A Tall Building or Skyscraper Without Leaving the Ground
    A tall building like the "Burj” in Dubai is almost 818 meters (2684 feet) above the ground level, which is currently the world’s tallest man-made structure. But how can you calculate it's height? There are actually several methods of doing so without leaving the ground.
  • Piles Foundation
    Pile foundations consist of piles that are dug into the soil till a layer of stable soil is reached. Pile foundations transferbuilding load to the bearing ground with greater bearing capacity. Pile foundations are useful in regions with unstable upper soil that may erode, or for large buildings.
  • Urban Tunneling
    Imagine the challenges of building a tunnel in an urban setting - for example, to construct a metro system in a big citysuch as London, New York, or Montreal. This article is about about building tunnels underground in cities and towns, or urban tunneling.
  • Basics Of Seismic Vibration Control
  • Though earthquakes can produce devastating damages to life and property, modern technologies of seismic vibration control such as building elevation control, elevated building foundations, and the use of dampers and springs can assist in minimizing earthquake damage.
  • Types of Excavators and Their Uses
    Excavators are vehicles that are used on construction sites to move material.
  • Cranes Used in Construction
    A crane is a lifting machine that principally works with the use of pulleys and cables. For the construction industry, cranes are valuable assets because they make working with heavy machinery and construction materials easy.
  • Base isolation is a very vital fortification which becomes operational subsequent to a major earthquake. Base isolationhas significant benefits to protect historic structures from earthquake.
  • Kinds of Base Isolation Systems
    Base Isolation also protects non-structural elements and instruments by lessening the entire structure’s speed during an earthquake, as opposed to toning alone. There are a diversity of isolation methods and devices available.
  • How a Hydroelectric Dam Works
    The power of falling water is unlocked by a hydroelectric dam in the form of electricity. In this article, we will look at how hydroelectric dams work, and what are their advantages and disadvantages.
  • Basics Of Construction Engineering
    Construction engineering is an important sub-discipline of civil engineering that has several applications in the modern world including the residential areas and industry. The construction activity being carried out is one of the indicators that reflect the economy of a nation.










No comments:

Post a Comment